ProCurve 9304m Diagnostics Manual page 20

Diagnostic Guide for ProCurve 9300/9400 Series Routing Switches
This Field... Displays...
SNOOP_M Number of management snoop operations.
FREE_B Number of buffers freed using BM_FREE_BUFFER or BM_FREE_BUFFER_MGMT.
FREE_B_M Additional counter indicating number of buffers freed using just
BM_FREE_BUFFER_MGMT.
Dram buf Amount of available packet processing memory. This number should always be close to
64.
No-bufs Number of times the CPU was unsuccessful in obtaining packet processing memory. This
number should be 0 under normal operation.
Syntax: de
Possible values: N/A
Default value: N/A
debug all
Activates all debugging functions on the device. The no form of the command deactivates all debugging functions.
NOTE: Activating all debugging functions can generate a lot of output and greatly slow the operation of the
device.
EXAMPLE:
ProCurveRS# debug all
Syntax: [no] debug all
Possible values: N/A
Default value: N/A
debug appletalk
Displays the number of timer events dropped and insufficient zone allocations in an Appletalk configuration.
EXAMPLE:
ProCurveRS# debug appletalk
Timer event Dropped: 0
Insufficient zone allocation: 0
Syntax: [no] debug appletalk
Possible values: N/A
Default value: N/A
debug destination
Specifies a destination for debugging output. You can send debugging output to the console, Syslog buffer, a
Telnet session, or an SSH session.
EXAMPLE:
ProCurveRS# debug destination ssh 1
Syntax: debug destination console | logging | telnet <num> | ssh <num>
Possible values: Specify one of the following destinations:
console Directs debugging output to the system console.
3 - 6
Table 3.1: Output from the de command (Continued)
June 2005