Diagnostic Commands - Syntax Descriptions - ProCurve 9304m Diagnostics Manual

ptrace ppp
ptrace rarp
ptrace rip
ptrace snmp
ptrace switch none
ptrace switch stp
ptrace tcp
ptrace telnet
ptrace term
ptrace tftp
ptrace udp
show ip bgp debug
show debug
Diagnostic Commands – Syntax Descriptions
The following commands are available at the Privileged EXEC level of the CLI for HP devices, except where noted.
de
Displays information about CPU buffer allocations.
EXAMPLE:
ProCurveRS# de
GADDR = 043a1588 TOT_IN
CPU_R =
SNOOP_M =
FREE_B =
Dram buf =
The following table describes the output from the de command:
This Field... Displays...
GADDR Address of g_sw_sys
TOT_IN Total number of CPU buffer allocations.
TOT_OUT Total number of CPU buffer deallocations.
CPU_R CPU read queue buffers.
GET_B CPU buffers allocated by BM_GET_BUFFER.
SNOOP Number of snoop operations.
June 2005
=
85 GET_B
175 SNOOP
56 FREE_B_M
63 No-bufs
Table 3.1: Output from the de command
HP Diagnostic Command Reference
260 TOT_OUT =
= 175
= 28
= 0
= 0
3-53
3-53
3-54
3-54
3-54
3-54
3-54
3-54
3-55
3-55
3-55
3-55
3-57
259
3 - 5