ProCurve 9304m Diagnostics Manual page 43

Possible values: N/A
Default value: N/A
debug ipv6 ospf ism
Displays comprehensive information about the status changes of OSPF version 3 interfaces. The debug ipv6
ospf ism-status command displays status change messages only. For more information, see "debug ipv6 ospf
ism-status" on page 3-29.
EXAMPLE:
ProCurveRS debug ipv6 ospf ism
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug ipv6 ospf ism command.
OSPFv3 ISM[137]: InterfaceUp
OSPFv3 ISM[137]: Status change Down -> Waiting (Priority > 0)
OSPFv3 ISM[137]: BackupSeen
OSPFv3 ISM[137]: Status change Waiting -> BDR (BackupSeen:DR Election)
OSPFv3 ISM[137]: {dr:0.0.0.0,bdr:0.0.0.0} -> {dr:2.2.2.2,bdr:1.2.3.4}
Syntax: [no] debug ipv6 ospf ism
Possible values: N/A
Default value: N/A
debug ipv6 ospf ism-events
Displays information when an event related to an OSPF version 3 interface, for example, an interface coming up,
occurs.
EXAMPLE:
ProCurveRS debug ipv6 ospf ism-events
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug ipv6 ospf ism-events command.
OSPFv3 ISM[137]: InterfaceUp
OSPFv3 ISM[137]: BackupSeen goes up
Syntax: [no] debug ipv6 ospf ism-events
Possible values: N/A
Default value: N/A
debug ipv6 ospf ism-status
Displays status change messages only related to OSPF version 3 interfaces. The debug ipv6 ospf ism command
displays more comprehensive information about OSPF version 3 interface status changes. For more information,
see "debug ipv6 ospf ism" on page 3-29.
EXAMPLE:
ProCurveRS debug ipv6 ospf ism-status
June 2005
HP Diagnostic Command Reference
3 - 29