ProCurve 9304m Diagnostics Manual page 55

debug ipv6 ospf route-calc-spf
Displays information about SPF routes calculated by an OSPF version 3 router.
EXAMPLE:
ProCurveRS debug ipv6 ospf route-calc-spf
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug ipv6 ospf route-calc-spf command.
OSPFv3 SPF: Calculation for area 0.0.0.0
OSPFv3 SPF: installing vertex 1.2.3.4
OSPFv3 SPF: 2.2.2.2:136 is the first hop
OSPFv3 SPF : 2.2.2.2:136 nexthop :: ifindex 137
OSPFv3 SPF: Examining Vertex: 2.2.2.2:136
OSPFv3 SPF: new node added to candidate list: 2.2.2.2:136
OSPFv3 SPF: installing vertex 2.2.2.2:136
OSPFv3 SPF : 2.2.2.2:0 nexthop fe80::2e0:52ff:feda:c347 ifindex 137
OSPFv3 SPF: Examining Vertex: 2.2.2.2:0
OSPFv3 SPF: new node added to candidate list: 2.2.2.2:0
OSPFv3 SPF: Ignore link description to myself
OSPFv3 SPF: installing vertex 2.2.2.2:0
OSPFv3 SPF: 2.2.2.2:136 inherits 2.2.2.2:0's nexthop_list
OSPFv3 SPF: Examining Vertex: 2.2.2.2:136
OSPFv3 SPF: already in SPF tree: 2.2.2.2:136
OSPFv3 SPF: Calculation for area 0.0.0.0 done
OSPFv3 SPF: Calculation for area 0.0.0.1
OSPFv3 SPF: installing vertex 1.2.3.4
OSPFv3 SPF: Calculation for area 0.0.0.1 done
Syntax: [no] debug ipv6 ospf route-calc-spf
Possible values: N/A
Default value: N/A
debug ipv6 ospf route-calc-transit
Displays information about transit routes calculated by an OSPF version 3 router.
EXAMPLE:
ProCurveRS debug ipv6 ospf route-calc-transit
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug ipv6 ospf route-calc-transit command.
OSPFv3 : TRANSIT ROUTE: Discarding routes with nexthop unresolved
Syntax: [no] debug ipv6 ospf route-calc-transit
Possible values: N/A
Default value: N/A
debug ipv6 ospf route-install
Displays information about routes added or removed from the OSPF version 3 route table.
EXAMPLE:
ProCurveRS debug ipv6 ospf route-install
June 2005
HP Diagnostic Command Reference
3 - 41