ProCurve 9304m Diagnostics Manual page 32

Diagnostic Guide for ProCurve 9300/9400 Series Routing Switches
Table 3.3: Output from the debug ip ospf packet command (Continued)
This Field... Displays...
aut: OSPF authentication type. Possible authentication types are:
0 – No authentication
1 – Simple password
2 – MD5
auk: OSPF authentication key.
Syntax: [no] debug ip ospf packet
Possible values: N/A
Default value: N/A
debug ip ospf retransmission
Displays OSPF retransmission related events.
EXAMPLE:
ProCurveRS# debug ip ospf retransmission
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug ip ospf retransmission command.
OSPF: examine each neighbor and add advertisement to the retransmission list if
necessary
OSPF: remove current database copy from all neighbors retransmission lists
Syntax: [no] debug ip ospf retransmission
Possible values: N/A
Default value: N/A
debug ip ospf spf
Displays information about shortest path first (SPF) or Dijkstra algorithm related OSPF events. This command
lists new routing table entries when they are added, as well as the updated routing table.
EXAMPLE:
ProCurveRS# debug ip ospf spf
3 - 18 June 2005