ProCurve 9304m Diagnostics Manual page 52

Diagnostic Guide for ProCurve 9300/9400 Series Routing Switches
debug ipv6 ospf packet-lsa-update
Displays information when an HP device that supports IPv6 sends or receives OSPF version 3 LSA update
packets.
EXAMPLE:
ProCurveRS debug ipv6 ospf packet-lsa-update
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug ipv6 ospf packet-lsa-update command.
OSPFv3: Snd LSUpdate on ethe 3/9(fe80::204:80ff:fe2c:
c048>fe80::2e0:52ff:feda:c347)
Type:2009, LSID:00000000 Adv:1.2.3.4 SEQ:80000001 AGE:1
OSPFv3: Rcv LSUpdate on ethe 3/9(fe80::2e0:52ff:feda:c347->fe80::204:80ff:fe2c:
c048)
Type:2001, LSID:00000000 Adv:1.2.3.4 SEQ:80000021 AGE:77
Type:2001, LSID:00000000 Adv:2.2.2.2 SEQ:80000030 AGE:1
Type:2009, LSID:00000000 Adv:2.2.2.2 SEQ:80000001 AGE:1
Type:0008, LSID:00000088 Adv:2.2.2.2 SEQ:80000003 AGE:854
Type:0008, LSID:00000089 Adv:1.2.3.4 SEQ:80000005 AGE:82
OSPFv3: Snd LSUpdate on ethe 3/9(fe80::204:80ff:fe2c:c048->ff02::5)
Type:2001, LSID:00000000 Adv:1.2.3.4 SEQ:80000022 AGE:1
Type:0008, LSID:00000089 Adv:1.2.3.4 SEQ:80000006 AGE:1
OSPFv3: Rcv LSUpdate on ethe 3/9(fe80::2e0:52ff:feda:c347->ff02::5)
Type:2002, LSID:00000088 Adv:2.2.2.2 SEQ:80000002 AGE:1
Type:2009, LSID:000002a8 Adv:2.2.2.2 SEQ:80000002 AGE:1
OSPFv3: Snd LSUpdate on ethe 3/9(fe80::204:80ff:fe2c:c048->ff02::5)
Type:2001, LSID:00000000 Adv:1.2.3.4 SEQ:80000023 AGE:1
OSPFv3: Rcv LSUpdate on ethe 3/9(fe80::2e0:52ff:feda:c347->ff02::5)
Type:2009, LSID:00000000 Adv:2.2.2.2 SEQ:80000001 AGE:3600
Type:2009, LSID:00000000 Adv:2.2.2.2 SEQ:80000001 AGE:3600
Type:2001, LSID:00000000 Adv:2.2.2.2 SEQ:80000031 AGE:1
OSPFv3: Snd LSUpdate on ethe 3/9(fe80::204:80ff:fe2c:c048->ff02::5)
Type:2009, LSID:00000000 Adv:1.2.3.4 SEQ:80000001 AGE:3600
Type:2009, LSID:00000000 Adv:1.2.3.4 SEQ:80000001 AGE:3600
OSPFv3: Rcv LSUpdate on ethe 3/9(fe80::2e0:52ff:feda:c347->ff02::5)
Type:2001, LSID:00000000 Adv:2.2.2.2 SEQ:80000032 AGE:1
Syntax: [no] debug ipv6 ospf packet-lsa-update
Possible values: N/A
Default value: N/A
debug ipv6 ospf route
Displays information about routes calculated by a OSPF version 3 router. The router calculates the following route
types: external, inter-area, intra-area, Shortest Path First (SPF), and transit.
EXAMPLE:
ProCurveRS debug ipv6 ospf route
3 - 38 June 2005