ProCurve 9304m Diagnostics Manual page 22

Diagnostic Guide for ProCurve 9300/9400 Series Routing Switches
Table 3.2 describes the contents of debug ip arp messages. The letters in brackets do not appear in the actual
output.
This Field...
rcvd or sent
[A] 192.168.4.56
[B] 000034ab67bd
[C] 192.168.4.32
[D] 00cdfeba23ab
[E] 9
Syntax: [no] debug ip arp
Possible values: N/A
Default value: N/A
debug ip bgp <address> updates
Displays BGP update information for a specific neighbor.
EXAMPLE:
ProCurveRS# debug ip bgp 1.1.1.192 updates
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug ip bgp <address> updates command.
BGP: 1.1.1.192 rcvd UPDATE about 1.1.1.0/24 -- withdrawn
BGP: 1.1.1.192 rcvd UPDATE 5.5.5.0/24
BGP: 1.1.1.192 rcvd UPDATE about 5.5.5.0/24 -- withdrawn
Syntax: [no] debug ip bgp <ip-addr> updates
Possible values: Valid IP address
Default value: N/A
debug ip bgp dampening
Displays BGP dampening information
EXAMPLE:
ProCurveRS# debug ip bgp dampening
3 - 8
Table 3.2: Output from the debug ip arp command
Displays...
Indicates whether the packet was sent or received.
Source IP address.
Source MAC address.
Destination IP address.
Destination MAC address.
Port number.
June 2005