ProCurve 9304m Diagnostics Manual page 50

Diagnostic Guide for ProCurve 9300/9400 Series Routing Switches
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug ipv6 ospf packet-dd command.
OSPFV3: set dbdesc seqnum 0000ec4a for 2.2.2.2OSPFv3: Snd DbDesc on ethe 3
/9(fe80::204:80ff:fe2c:c048->fe80::2e0:52ff:feda:c347)
OSPFv3: Rcv DbDesc on ethe 3/9(fe80::2e0:52ff:feda:c347->fe80::204:80ff:fe2c:c048)
OSPFv3: Snd DbDesc on ethe 3/9(fe80::204:80ff:fe2c:c048->fe80::2e0:52ff:feda:c347)
Type:2001, LSID:00000000 Adv:1.2.3.4 SEQ:8000001c AGE:4
Type:2001, LSID:00000000 Adv:2.2.2.2 SEQ:80000025 AGE:3551
Type:2002, LSID:00000088 Adv:2.2.2.2 SEQ:80000001 AGE:3555
Type:2009, LSID:00000000 Adv:1.2.3.4 SEQ:80000007 AGE:4
Type:2009, LSID:000002a8 Adv:2.2.2.2 SEQ:80000001 AGE:3555
Type:0008, LSID:00000089 Adv:1.2.3.4 SEQ:80000003 AGE:35
OSPFv3: Rcv DbDesc on ethe 3/9(fe80::2e0:52ff:feda:c347->fe80::204:80ff:fe2c:c048)
Type:2001, LSID:00000000 Adv:2.2.2.2 SEQ:80000002 AGE:1
Type:2009, LSID:00000000 Adv:2.2.2.2 SEQ:80000003 AGE:1
Type:0008, LSID:00000088 Adv:2.2.2.2 SEQ:80000003 AGE:32
OSPFv3: Snd DbDesc on ethe 3/9(fe80::204:80ff:fe2c:c048->fe80::2e0:52ff:feda:c347)
Syntax: [no] debug ipv6 ospf packet-dd
Possible values: N/A
Default value: N/A
debug ipv6 ospf packet-hello
Displays information when an HP device that supports IPv6 sends or receives OSPF version 3 hello packets.
EXAMPLE:
ProCurveRS debug ipv6 ospf packet-hello
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug ipv6 ospf packet-hello command.
OSPFv3: Snd Hello on ethe 3/9(fe80::204:80ff:fe2c:c048->ff02::5)
RtrID:1.2.3.4 DR:2.2.2.2 BDR:1.2.3.4
OSPFv3: Rcv Hello on ethe 3/9(fe80::2e0:52ff:feda:c347->ff02::5)
RtrID:2.2.2.2 DR:2.2.2.2 BDR:1.2.3.4
Syntax: [no] debug ipv6 ospf packet-hello
Possible values: N/A
Default value: N/A
debug ipv6 ospf packet-lsa-ack
Displays information when an HP device that supports IPv6 sends or receives OSPF version 3 LSA ack packets.
EXAMPLE:
ProCurveRS debug ipv6 ospf packet-lsa-ack
3 - 36 June 2005