ProCurve 9304m Diagnostics Manual page 21

logging Directs debugging output to the Syslog buffer and also to the Syslog server, if configured.
telnet <num> Directs debugging output to the specified Telnet session.
ssh <num> Directs debugging output to the specified SSH session.
Default value: By default, debugging output is sent to the Console.
debug gvrp packets
Displays GVRP information.
EXAMPLE:
ProCurveRS# debug gvrp packets
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug gvrp packets command.
GVRP: Port 2/1 RCV
GVRP: 0x2095ced4:
GVRP: 0x2095cee4:
GVRP: 0x2095cef4:
GVRP: 0x2095cf04:
GVRP: Port 2/1 TX
GVRP: 0x207651b8:
GVRP: 0x207651c8:
GVRP: 0x207651d8:
GVRP: 0x207651e8:
GVRP: 0x207651f8:
GVRP: Port 2/1 TX
GVRP: 0x207651b8:
GVRP: 0x207651c8:
GVRP: 0x207651d8:
Syntax: [no] debug gvrp packets
Possible values: N/A
Default value: N/A
debug ip arp
Displays information about ARP messages sent and received by the device.
EXAMPLE:
ProCurveRS# debug ip arp
After you enter this command, messages such as the following appear at the destination specified for debugging
output. You can turn off these messages with the no debug arp command.
IP ARP: rcvd 192.168.4.56 000034ab67bd
IP ARP: sent 192.168.4.32 000034ab67bd
June 2005
01 80 c2 00 00 21 00 e0 52 ab 87 40 00 28 42 42
03 00 01 01 04 02 03 e9 04 01 03 eb 04 01 03 ec
04 01 03 ef 04 01 03 f1 04 01 05 dd 04 01 09 cb
04 01 0f a1 00 00
01 80 c2 00 00 21 00 04 80 2c 0e 20 00 3a 42 42
03 00 01 01 02 00 04 05 03 e9 04 05 03 eb 04 05
03 ec 04 05 03 ef 04 05 03 f1 04 05 05 dd 04 05
09 cb 04 05 0f a1 04 02 00 02 04 01 00 07 04 01
00 09 04 01 00 0b 00 00
01 80 c2 00 00 21 00 04 80 2c 0e 20 00 18 42 42
03 00 01 01 04 02 00 02 04 01 00 07 04 01 00 09
04 01 00 0b 00 00
[A] [B]
HP Diagnostic Command Reference
[C]
, 192.168.4.32 00cdfeba23ab
, 192.168.4.4 00cdfeba23ab
[D] [E]
9
9
3 - 7