Table of Contents
Advertisement
Diagnostic Guide for ProCurve 9300/9400 Series Routing Switches
Bold
highlights a CLI command.
Bold Italic
highlights a term that is being defined.
Underline
highlights a link on the Web management interface.
Capitals
highlights field names and buttons that appear in the Web management interface.
NOTE: A note emphasizes an important fact or calls your attention to a dependency.
WARNING: A warning calls your attention to a possible hazard that can cause injury or death.
CAUTION:
A caution calls your attention to either a possible hazard that can damage equipment or an action
that can produce an operating problem or other unwanted results.
Terminology
The following table defines basic product terms used in this guide.
Term
chassis
or
Chassis device
EP
and
Standard
Routing Switch
or
router
Switch
ProCurveRS#
Support and Warranty Information
Refer to Support is as Close as the World Wide Web, which was shipped with your ProCurve Routing Switch.
Related Publications
Refer to the "Organization of Product Documentation" on page vii for a list of publications for your ProCurve
Routing Switch.
1 - 2
Definition
A Routing Switch that accepts optional modules or power supplies. The
ProCurve 9304M, 9308M, 9315M, and 9408sl Routing Switches are Chassis
devices.
9300 Series Chassis devices can be EP or Standard devices, depending on
whether the management module is an EP or Standard module.
A Layer 2 and Layer 3 device that switches and routes network traffic. The
term router is sometimes used in this document in descriptions of a Routing
Switch's Layer 3 routing protocol features.
A Layer 2 device that switches network traffic.
An example Command Line Interface (CLI) prompt. Actual prompts show
the product number for the device, such as HP9304#.
June 2005
Advertisement
Table of Contents
