Xstatus Ice Call Remote Ip - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xStatus ICE Call Remote IP

Returns the IP address the remote system is using for media routing in the present call.
Value space of the result returned:
<String>
Example:
xStatus ICE Call Remote IP
*s ICE Call 1 Remote IP: "192.0.1.20"
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration
MediaChannels status
xStatus MediaChannels
xStatus MediaChannels Call [1..n] IncomingAudioChannel [1..n] Encryption Status
xStatus MediaChannels Call [1..n] IncomingAudioChannel [1..n] Audio Protocol
140
xCommand
Shows the top level overview of the media channel status. The example shows the status for an
ongoing call. The identities of the call and channels are used when querying additional information.
Shows the encryption status on the incoming channel.
Value space of the result returned:
<On/Off>
Example:
xStatus MediaChannels Call 27 IncomingAudioChannel 327 Encryption Status
*s MediaChannels Call 27 IncomingAudioChannel 327 Encryption Status: Off
** end
Shows the audio algorithm for the incoming audio channel.
AACLD: The AAC-LD is an MPEG-4 Low Delay Audio Coder audio compression format.
G722: The G.722 algorithm is an ITU standard.
G7221: The G.722.1 algorithm is a licensed royalty-free ITU-T standard.
G711Mu: The G.711 Mu-law compression algorithm is used in North America and Japan.
G711A: The G.711 A-law compression algorithm is used in Europe and the rest of the world.
G729: The G.729 algorithm is an ITU standard.
G729AB: The G.729 annex A and B is an ITU standard.
Value space of the result returned:
<AACLD/G722/G7221/G711Mu/G711A/G729/G729AB>
Example:
xStatus MediaChannels Call 27 IncomingAudioChannel 327 Audio Protocol
*s MediaChannels Call 27 IncomingAudioChannel 327 Audio Protocol: AACLD
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.