Cisco TelePresence SX20 Codec Reference Manual page 94

Cisco TelePresence SX20 Codec
Contents Introduction
xCommand Key Release
Emulates a remote control key release. The Key Release command is issued after a Key Press
command.
Requires user role: ADMIN
Parameters:
Key(r): <0/1/2/3/4/5/6/7/8/9/C/Call/Disconnect/Down/F1/F2/F3/F4/F5/Grab/Home/Layout/
Left/Mute/MuteMic/Ok/PhoneBook/Presentation/Right/Selfview/Square/SrcAux/SrcCamera/
SrcDocCam/SrcPc/SrcVcr/Star/Up/VolumeDown/VolumeUp/ZoomIn/ZoomOut>
Example:
xCommand Key Release Key:Home
*r KeyReleaseResult (status=OK):
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration
Message commands
xCommand Message Alert Display
xCommand Message Alert Clear
94
xCommand xCommand
Display a message on screen, for a specified duration of time (in seconds). NOTE: If Duration is not
set, the command must be followed by xCommand Message Alert Clear.
Use the xFeedback commands to monitor the feedback from the user. Read more about the
xFeedback commands in the API introduction section in this guide.
Title: Enter a message title.
Text: Enter the message to be displayed. The <p> and <br> HTML tags will result in line breaks as
normal; any other tags will appear as plain text.
Duration: Set how long (in seconds) the message is to be displayed on the screen. If set to 0 (zero)
the message does not disappear until a xCommand Message Alert Clear message has been sent.
Requires user role: ADMIN
Parameters:
Title: <S: 0, 255>
Text(r): <S: 0, 255>
Duration: <0..3600>
Example:
xCommand Message Alert Display Title: "Message" Text: "The meeting will
end in 5 minutes." Duration: 20
OK
*r MessageAlertDisplayResult (status=OK):
** end
Remove the message which was displayed using the xCommand Message Alert Display command.
This is required when the Duration parameter is not set.
Requires user role: ADMIN
Example:
xCommand Message Alert Clear
OK
*r MessageAlertClearResult (status=OK):
** end
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.