Cisco TelePresence SX20 Codec Reference Manual page 99

Cisco TelePresence SX20 Codec
Contents Introduction
xCommand Phonebook Contact Delete
Delete an existing contact from the local phonebook.
ContactId: The unique identifier for the contact. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook Contact Add
command was issued to make the contact.
Requires user role: ADMIN
Parameters:
ContactId(r): <S: 0, 255>
Example:
xCommand Phonebook Contact Delete ContactId:localContactId-1
OK
*r PhonebookContactDeleteResult (status=OK):
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration
xCommand Phonebook ContactMethod Add
Add contact details for an existing contact in the local phonebook. The command returns the
ContactMethodId, which is a unique string that identifies the contact method; typically the format is "n".
You can add several contact methods to a contact. Note that only the first contact method will appear
in the Favorites list on the Cisco TelePresence Touch controller. The first contact method may have
been created when issuing the xCommand Phonebook Contact Add command to make the contact. All
contact methods are available in the API, on the web interface and when using the remote control.
ContactId: The unique identifier for the contact that you want to add a contact method to. The identifier
will be returned by an xCommand Phonebook Search command. It was also returned when the
xCommand Phonebook Contact Add command was issued to make the contact.
Device: Set which type of device to call to.
Number(r): The phone number or address of the contact.
Protocol: Select Auto, SIP, H323 or H320 protocol.
CallRate: Set a call rate.
CallType: Select a call type (audio or video).
Requires user role: ADMIN
Parameters:
Example:
99
xCommand xCommand
ContactId(r): <S: 0, 255>
Device: <Mobile/Other/Telephone/Video>
Number(r): <S: 0, 255>
Protocol: <Auto/H320/H323/SIP>
CallRate: <0..6000>
CallType: <Audio/Video>
xCommand Phonebook ContactMethod Add ContactId:localContactId-2 Number:54321
Protocol:H323
OK
*r PhonebookContactMethodAddResult (status=OK):
Name: 1
** end
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.