Cisco TelePresence SX20 Codec Reference Manual page 85

Cisco TelePresence SX20 Codec
Contents Introduction
CamCtrlPip commands
xCommand CamCtrlPip
Show or hide the camera self-view in a small window (picture in picture).
Mode: Select whether the self-view picture in picture is on or off.
Duration: Set how long the self-view is shown for on screen.
Requires user role: USER
Parameters:
Mode(r): <On/Off>
Duration: <0..60>
Example:
xCommand CamCtrlPip Mode: On
*r CamCtrlPipResult (status=OK):
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration
Camera commands
xCommand Camera PanTiltReset
xCommand Camera PositionReset
85
xCommand xCommand
The camera is reset to its default values for pan and tilt. If the camera is daisy chained, the
CameraId is given by its place in the chain.
Requires user role: USER
Parameters:
CameraId(r): <1..1>
Example:
xCommand Camera PanTiltReset CameraId:1
OK
*r PanTiltResetResult (status=OK):
** end
Reset the camera position the the default position.
Requires user role: USER
Parameters:
CameraId(r): <1..1>
Example:
xCommand Camera PositionReset CameraId:1
OK
*r CameraPositionResetResult (status=OK):
** end
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.