Cisco TelePresence SX20 Codec Reference Manual page 78

Cisco TelePresence SX20 Codec
Contents Introduction
Audio commands
xCommand Audio Microphones Mute
Mute all microphones.
Requires user role: USER
Example:
xCommand Audio Microphones Mute
*r AudioMicrophonesMuteResult (status=OK):
** end
xCommand Audio Microphones Unmute
Unmute microphones.
Requires user role: USER
Example:
xCommand Audio Microphones Unmute
*r AudioMicrophonesUnmuteResult (status=OK):
** end
xCommand Audio Sound Play
Play a specified audio sound.
Requires user role: USER
Parameters:
Sound(r): <Busy/CallWaiting/Dial/KeyTone/Ringing/SpecialInfo/TelephoneCall/VideoCall>
Loop: <On/Off>
Example:
xCommand Audio Sound Play Sound: Ringing
*r AudioSoundPlayResult (status=OK):
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration
xCommand Audio Sound Stop
78
xCommand xCommand
Stop playing audio sound.
Requires user role: USER
Example:
xCommand Audio Sound Stop
*r AudioSoundStopResult (status=OK):
** end
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.