Security Status; Xstatus Security Fips Mode; Sip Status; Xstatus Sip - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

Security status

xStatus Security FIPS Mode

Shows the FIPS mode status.
Value space of the result returned:
<On/Off>
Example:
xStatus Security FIPS Mode
*s Security FIPS Mode: Off
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration

SIP status

xStatus SIP

xStatus SIP Proxy [1] Status

xStatus SIP Proxy [1] Address

159
xCommand
Shows the top level overview of the SIP status.
Shows the status of the communication between the endpoint and the SIP Proxy server.
Active: The communication between the endpoint and the SIP Proxy is active.
DNSFailed: The attempt to establish communication to the DNS server failed.
Off: There is no communication between the endpoint and the SIP Proxy.
Timeout: The attempt to establish communication to the SIP Proxy timed out.
UnableTCP: The system is unable to use TCP as the transport method.
UnableTLS: The system is unable to use TLS as the transport method.
Unknown: The status of the communication is not known.
Value space of the result returned:
<Active/DNSFailed/Off/Timeout/UnableTCP/UnableTLS/Unknown>
Example:
xStatus SIP Proxy 1 Status
*s SIP Proxy 1 Status: Active
** end
Shows the address of the SIP Proxy that the system communicates with.
Value space of the result returned:
<String>
Example:
xStatus SIP Proxy 1 Address
*s SIP Proxy 1 Address: "192.0.2.50"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.