Cisco TelePresence SX20 Codec Reference Manual page 72

Cisco TelePresence SX20 Codec
Contents Introduction
xConfiguration Video Output HDMI [1,2] MonitorRole
The HDMI monitor role describes which video stream will be shown on the monitor connected to the
video output HDMI connector.
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly>
First/Second: Define the role of the monitor in a multi-monitor setup. In a single-monitor setup,
there is no difference between First and Second.
PresentationOnly: Show presentation video stream if active, and nothing else.
Example: xConfiguration Video Output HDMI 1 MonitorRole: First
xConfiguration Video Output HDMI [1,2] OverscanLevel
Some TVs or other monitors may not display the whole image sent out on the systems video output,
but cuts the outer parts of the image. In this case this setting can be used to let the system not use
the outer parts of video resolution. Both the video and the OSD menu will be scaled in this case.
Requires user role: ADMIN
Value space: <Medium/High/None>
Medium: The system will not use the outer 3% of the output resolution.
High: The system will not use the outer 6% of the output resolution
None: The system will use all of the output resolution.
Example: xConfiguration Video Output HDMI 1 OverscanLevel: None
xConfiguration Video Output HDMI [1,2] Resolution
Select the preferred resolution for the monitor connected to the video output HDMI connector. This
will force the resolution on the monitor.
Requires user role: ADMIN
Value space: <Auto/1024_768_60/1280_1024_60/1280_720_60/1920_1080_60/1280_768_60/13
60_768_60/1366_768_60>
Auto: The system will automatically try to set the optimal resolution based on negotiation with the
connected monitor.
Range: 1024x768@60p, 1280x1024@60p, 1280x720@60p, 1920x1080@60p, 1280x768@60p,
1360x768@60p, 1366x768@60p
Example: xConfiguration Video Output HDMI 1 Resolution: Auto
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration xConfiguration
xConfiguration Video WallPaper
72
xCommand
Select a background image (wallpaper) for the video screen when idle.
Requires user role: USER
Value space: <None/Custom/Growing/Summersky/Waves>
None: There is no background image on the screen, i.e. the background is black.
Custom: Use the custom wallpaper that is stored on the system as background image on the
screen. As default, there is no custom wallpaper stored and the background will be black. You
can upload a custom wallpaper to the system using the web interface. The maximum supported
resolution is 1920x1200.
Summersky, Growing, Waves: The chosen background image is shown on the screen.
Example: xConfiguration Video Wallpaper: Summersky
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.