Cisco TelePresence SX20 Codec Reference Manual page 105

Cisco TelePresence SX20 Codec
Contents Introduction
Standby commands
xCommand Standby Activate
Set the system in standby mode, which turns off the video outputs and put the camera into sleep
mode.
Requires user role: USER
Example:
xCommand Standby Activate
*r ActivateResult (status=OK):
** end
xCommand Standby Deactivate
Bring the system out of standby mode.
Requires user role: USER
Example:
xCommand Standby Deactivate
*r DeactivateResult (status=OK):
** end
xCommand Standby ResetTimer
Set a temporary standby delay (in minutes). If the system is in standby mode when the reset timer
is set, the system is brought out of standby mode. When left idle for the given delay the system
goes into standby mode. Setting the reset timer does not affect the Standby Delay in the Advanced
configuration menu (or by xConfiguration Standby Delay). Next time this delay is the valid standby
delay.
Requires user role: USER
Parameters:
Delay(r): <1..480>
Example:
xCommand Standby ResetTimer Delay:10
*r ResetResult (status=OK):
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration
SystemUnit commands
xCommand SystemUnit OptionKey Add
xCommand SystemUnit OptionKey RemoveAll
xCommand SystemUnit ReleaseKey Add
105
xCommand xCommand
Add an option key to support additional features.
Requires user role: ADMIN
Parameters:
Key(r): <S: 16, 24>
Example:
xCommand SystemUnit OptionKey Add Key:******************
*r OptionKeyResult (status=OK):
** end
Removes all Option keys.
Requires user role: ADMIN
Parameters:
Confirm(r): <Yes>
Example:
xCommand SystemUnit OptionKey RemoveAll Confirm: Yes
*r OptionKeyResult (status=OK):
** end
Add the software release key. Used to enable new software (applicable for main software releases).
Requires user role: ADMIN
Parameters:
Key(r): <S: 16, 24>
Example:
xCommand SystemUnit ReleaseKey Add Key:******************
*r ReleaseKeyResult (status=OK):
** end
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.