Cisco TelePresence SX20 Codec Reference Manual page 55

Cisco TelePresence SX20 Codec
Contents Introduction
xConfiguration SIP Profile [1..1] Turn UserName
The user name needed for accessing the TURN server.
Requires user role: ADMIN
Value space: <S: 0, 128>
Format: String with a maximum of 128 characters.
Example: xConfiguration SIP Profile 1 Turn UserName: ""
xConfiguration SIP Profile [1..1] Turn Password
The password needed for accessing the TURN server.
Requires user role: ADMIN
Value space: <S: 0, 128>
Format: String with a maximum of 128 characters.
Example: xConfiguration SIP Profile 1 Turn Password: ""
xConfiguration SIP Profile [1..1] URI
The SIP URI (Uniform Resource Identifier) is the address that is used to identify the video system.
The URI is registered and used by the SIP services to route inbound calls to the system. The SIP URI
syntax is defined in RFC 3261.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with maximum 255 characters and compliant with the SIP URI syntax.
Example: xConfiguration SIP Profile 1 URI: "sip:firstname.lastname@company.com"
xConfiguration SIP Profile [1..1] DisplayName
When configured the incoming call will report the DisplayName instead of the SIP URI.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: xConfiguration SIP Profile 1 DisplayName: ""
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration xConfiguration
xConfiguration SIP Profile [1..1] Authentication [1..1] LoginName
xConfiguration SIP Profile [1..1] Authentication [1..1] Password
xConfiguration SIP Profile [1..1] DefaultTransport
55
xCommand
This is the user name part of the credentials used to authenticate towards the SIP proxy.
Requires user role: ADMIN
Value space: <S: 0, 128>
Format: String with a maximum of 128 characters.
Example: xConfiguration SIP Profile 1 Authentication 1 LoginName: ""
This is the password part of the credentials used to authenticate towards the SIP proxy.
Requires user role: ADMIN
Value space: <S: 0, 128>
Format: String with a maximum of 128 characters.
Example: xConfiguration SIP Profile 1 Authentication 1 Password: ""
Select the transport protocol to be used over the LAN.
Requires user role: ADMIN
Value space: <TCP/UDP/Tls/Auto>
TCP: The system will always use TCP as the default transport method.
UDP: The system will always use UDP as the default transport method.
Tls: The system will always use TLS as the default transport method. For TLS connections a SIP
CA-list can be uploaded to the video system. If no such CA-list is available on the system then
anonymous Diffie Hellman will be used.
Auto: The system will try to connect using transport protocols in the following order: TLS, TCP,
UDP.
Example: xConfiguration SIP Profile 1 DefaultTransport: Auto
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.