Cisco TelePresence SX20 Codec Reference Manual page 51

Cisco TelePresence SX20 Codec
Contents Introduction
xConfiguration Provisioning LoginName
This is the user name part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server. If
Provisioning Mode is Callway (WebEx TelePresence), enter the video number.
Requires user role: ADMIN
Value space: <S: 0, 80>
Format: String with a maximum of 80 characters.
Example: xConfiguration Provisioning LoginName: ""
xConfiguration Provisioning Password
This is the password part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server. If
Provisioning Mode is Callway (WebEx TelePresence), enter the activation code.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: xConfiguration Provisioning Password: ""
xConfiguration Provisioning HttpMethod
Select the HTTP method to be used for the provisioning.
Requires user role: ADMIN
Value space: <GET/POST>
GET: Select GET when the provisioning server supports GET.
POST: Select POST when the provisioning server supports POST.
Example: xConfiguration Provisioning HttpMethod: POST
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration xConfiguration
xConfiguration Provisioning ExternalManager Address
xConfiguration Provisioning ExternalManager Protocol
xConfiguration Provisioning ExternalManager Path
51
xCommand
Enter the IP Address or DNS name of the external manager / provisioning system.
If an External Manager Address (and Path) is configured, the system will send a message to this
address when starting up. When receiving this message the external manager / provisioning system
can return configurations/commands to the unit as a result.
When using CUCM or TMS provisioning, the DHCP server can be set up to provide the external
manager address automatically (DHCP Option 242 for TMS, and DHCP Option 150 for CUCM). An
address set in the Provisioning ExternalManager Address setting will override the address provided
by DHCP.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address, IPv6 address or DNS name.
Example: xConfiguration Provisioning ExternalManager Address: ""
Determine whether to use secure management or not.
Requires user role: ADMIN
Value space: <HTTP/HTTPS>
HTTP: Set to HTTP to disable secure management. Requires HTTP to be enabled in the
NetworkServices HTTP Mode setting.
HTTPS: Set to HTTPS to enable secure management. Requires HTTPS to be enabled in the
NetworkServices HTTPS Mode setting.
Example: xConfiguration Provisioning ExternalManager Protocol: HTTP
Set the Path to the external manager / provisioning system. This setting is required when several
management services reside on the same server, i.e. share the same External Manager address.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: xConfiguration Provisioning ExternalManager Path: "tms/public/external/
management/SystemManagementService.asmx"
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.