Cisco TelePresence SX20 Codec Reference Manual page 69

Cisco TelePresence SX20 Codec
Contents Introduction
xConfiguration Video OSD Mode
The Video OSD (On Screen Display) Mode lets you define if information and icons should be
displayed on screen.
Requires user role: ADMIN
Value space: <Off/On>
Off: Hide the on screen menus, icons and indicators.
On: Display the on screen menus, icons and indicators.
Example: xConfiguration Video OSD Mode: On
xConfiguration Video OSD WallPaperSelection
Applies to the on screen menu (OSD). The wall paper selection menu can be hidden outside the
administrator settings menu and visible inside, or it can be visible both inside and outside the
administrator settings menu. The administrator settings menu can be password protected.
Requires user role: ADMIN
Value space: <Off/On>
Example: xConfiguration Video OSD WallPaperSelection: On
xConfiguration Video OSD LanguageSelection
Applies to the on screen menu (OSD). The language selection menu can be hidden outside the
administrator settings menu and visible inside, or it can be visible both inside and outside the
administrator settings menu. The administrator settings menu can be password protected.
Requires user role: ADMIN
Value space: <Off/On>
Off: The language selection menu is hidden outside the administrator settings menu and visible
inside. To change the language, navigate to: Home > Settings > Administrator Settings. If required
log in with your username and password. Then navigate to Language.
On: The language selection menu is visible both inside and outside the administrator settings
menu. To change the language, navigate to: Home > Settings > Language. Or navigate to Home
> Settings > Administrator Settings. If required log in with your username and password. Then
navigate to Language.
Example: xConfiguration Video OSD LanguageSelection: On
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration xConfiguration
xConfiguration Video OSD MenuStartupMode
xConfiguration Video OSD VirtualKeyboard
xConfiguration Video OSD EncryptionIndicator
69
xCommand
Configures the state of the OSD (On Screen Display) menu after a video system / codec boot. The
setting only applies when the video system is operated by a remote control and the on-screen
menu.
Requires user role: ADMIN
Value space: <Closed/Home>
Closed: The OSD menu will NOT expand automatically. This setting is recommended for 3rd party
integrations that need full control of what is shown on the OSD.
Home: The OSD menu will show the home menu expanded.
Example: xConfiguration Video OSD MenyStartUpMode: Home
Determine whether or not the virtual keyboard will automatically show on screen when text is to be
entered in an input field. The setting only applies when the video system is operated by a remote
control and the on-screen menu.
Requires user role: ADMIN
Value space: <UserSelectable/AlwaysOn>
UserSelectable: The user has to press a softbutton to open or close the virtual keyboard.
AlwaysOn: The virtual keyboard is automatically shown on screen as long as text can be entered in
an input field.
Example: xConfiguration Video OSD VirtualKeyboard: UserSelectable
Define for how long the encryption indicator (a padlock) will be shown on screen. The setting
applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure
conferences. The icon for encrypted calls is a locked padlock, and the icon for non-encrypted calls
is a crossed out locked padlock.
Requires user role: ADMIN
Value space: <Auto/AlwaysOn/AlwaysOff>
Auto: If the Conference Encryption Mode setting is set to BestEffort and the call is encrypted, the
encryption indicator is shown during the first seconds of a call. If the Conference Encryption Mode
setting is set to BestEffort and the call is non-encrypted, the crossed out encryption indicator is
shown during the entire call. If the Conference Encryption Mode setting is NOT set to BestEffort,
the encryption indicator is not shown at all.
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies to
both encrypted and non-encrypted calls for all Conference Encryption Mode settings.
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both encrypted
and non-encrypted calls for all Conference Encryption Mode settings.
Example: xConfiguration Video OSD EncryptionIndicator: Auto
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.