Xstatus Ice Call Remote Ip; Xstatus Ice Turn Discovermode; Xstatus Ice Turn Bandwidth - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xStatus ICE Call Remote IP

Returns the IP address the remote system is using for media routing in the present call.
Value space of the result returned:
<String>
Example:
xStatus ICE Call Remote IP
*s ICE Call 1 Remote IP: "192.0.1.20"
** end

xStatus ICE Turn Discovermode

Returns the result of the turn server test, if xConfiguration SIP Profile[1] Turn DiscoverMode is set to
On.
Verified: The server was reached, and the user name and password were received.
NotVerified: Configuration has been received, but neither server or credentials has been verified.
Failed: The server was not reached.
Off: Turn discovery mode is set to Off.
Value space of the result returned:
<Verified/NotVerified/Failed/Off>
Example:
xStatus ICE Turn Discovermode
*s ICE Turn Discovermode: "Verified"
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration

xStatus ICE Turn Bandwidth

148
xCommand
Returns the bandwidth available for the turn server right after xConfiguration SIP Profile 1 Turn
BandwidthProbe is set to On.
Probing failed: Could not obtain information on bandwidth.
Probe Aborted: The probing was canceled because a call started.
Probe Connected: The probing has stared.
Probe progress: Shows the bandwidth at this stage of the test.
Probe stopped with loss: The probing finished, because packet loss was detected. The loss is
shown in kbps.
Probe Completed: The probing completed. The bandwidth result shown in kbps.
Value space of the result returned:
<"Probing failed"/"Probe Aborted"/"Probe Connected"/"Probe progress"/"Probe stopped with
loss: kbps"/"Probe Completed: kbps">
Example:
xStatus ICE Turn Bandwidth
*s ICE Turn Bandwidth: "Probe Completed: 6000kbps"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.