Xconfiguration Network [1] Ipv6 Dhcpoptions; Xconfiguration Network [1] Mtu; Xconfiguration Network [1] Qos Mode - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xConfiguration Network [1] IPv6 DHCPOptions

Retrieve a set of DHCP options, for example NTP and DNS server addresses, from a DHCPv6
server.
Requires user role: ADMIN, USER
Default value: On
USAGE:
xConfiguration Network n IPv6 DHCPOptions:
where
: Index that identifies the network. Range: 1..1
n
: Off/On
DHCPOptions
Off: Disable the retrieval of DHCP options from a DHCPv6 server.
On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.

xConfiguration Network [1] MTU

Define the Ethernet MTU (Maximum Transmission Unit) size. The MTU size must be supported
by your network infrastructure. The minimum size is 576 for IPv4 and 1280 for IPv6.
Requires user role: ADMIN, USER
Default value: 1500
USAGE:
xConfiguration Network n MTU: MTU
where
: Index that identifies the network. Range: 1..1
n
: Integer (576..1500)
MTU
Set a value for the MTU (bytes).
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API xConfiguration xConfiguration
DHCPOptions
xCommand

xConfiguration Network [1] QoS Mode

The QoS (Quality of Service) is a method which handles the priority of audio, video and data in
the network. The QoS settings must be supported by the infrastructure. Diffserv (Differentiated
Services) is a computer networking architecture that specifies a simple, scalable and coarse-
grained mechanism for classifying, managing network traffic and providing QoS priorities on
modern IP networks.
Requires user role: ADMIN, USER
Default value: Diffserv
USAGE:
xConfiguration Network n QoS Mode:
where
: Index that identifies the network. Range: 1..1
n
: Off/Diffserv
Mode
Off: No QoS method is used.
Diffserv: When you set the QoS Mode to Diffserv, the Network QoS Diffserv Audio,
Network QoS Diffserv Video, Network QoS Diffserv Data, Network QoS Diffserv
Signalling, Network QoS Diffserv ICMPv6 and Network QoS Diffserv NTP settings are
used to prioritize packets.
50
API Reference Guide
xStatus Appendices
Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.