Xstatus Network Cdp Voipappliancevlanid; Networkservices Status; Xstatus Networkservices Ntp Address; Xstatus Networkservices Ntp Currentaddress - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xStatus Network CDP VoIPApplianceVlanID

Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information see
documentation of the IEEE 802.1Q protocol.
Value space of the result returned:
<String>
Example:
xStatus Network CDP VoIPApplianceVlanID
*s Network 1 CDP VoIPApplianceVlanID: "300"
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration

NetworkServices status

xStatus NetworkServices NTP Address

xStatus NetworkServices NTP CurrentAddress

xStatus NetworkServices NTP Status

162
xCommand
Returns the address of the NTP server(s) the codec is using.
Value space of the result returned:
<String>
Example:
xStatus NetworkServices NTP Address
*s NetworkServices NTP Address: "12.104.193.12 64.104.222.16 144.254.15.121"
** end
Returns the address of the NTP server that is currently in use.
Value space of the result returned:
<String>
Example:
xStatus NetworkServices NTP CurrentAddress
*s NetworkServices NTP CurrentAddress: "123.254.15.121"
** end
Returns the status of the endpoints synchronizing with the NTP server.
Unknown: State of the synchronization is unknown.
Synced: The system is in sync with the NTP server
Discarded: The NTP result has been discarded.
Value space of the result returned:
<Unknown/Synced/Discarded>
Example:
xStatus NetworkServices NTP Status
*s NetworkServices NTP Status: Synced
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.