Set Valve Body - Toyota LAND CRUISER Service Manual Supplement

BRAKE SYSTEM (STATION WAGON) - LOAD SENSING PROPORTIONING
AND BY-PASS VALVE (LSP & BV)
3. CONNECT BRAKE LINES
Using SST, connect the brake lines.
SST 09751-36011
Torque: 15 Nm (155 kgfcm, 11 ft-lbf)
4. SET REAR AXLE LOAD
(See page BR-16)
5.

SET VALVE BODY

(a) When pulling down the load sensing spring, confirm that
the valve piston moves down smoothly.
(b) Position the valve body so that the valve piston lightly
contacts the load sensing spring.
(c) Tighten the valve body mounting nuts.
Torque: 13 Nm (130 kgfcm, 9 ft-lbf)
6. BLEED BRAKE SYSTEM
(See pub No. RM184E, page BR-7)
7. CHECK FLUID LEAKAGE
8. CHECK AND ADJUST LSP & BV FLUID PRESSURE
(See page BR-16)
BR-19