Rear Speed Sensor Removal; Rear Speed Sensor Installation - Toyota LAND CRUISER Service Manual Supplement

BRAKE SYSTEM (STATION WAGON) - ANTI-LOCK BRAKE SYSTEM (ABS)

REAR SPEED SENSOR REMOVAL

HINT: When replacing the sensor or sensor harness,
replace the sensor and sensor harness together as a set.
1. DISCONNECT SPEED SENSOR CONNECTOR
(a) Disconnect the speed sensor connector.
(b) Remove the five clamp bolts holding the sensor wire
harness from the suspension arm and frame.
2. REMOVE SPEED SENSOR
Remove the speed sensor from the axle end.

REAR SPEED SENSOR INSTALLATION

1. INSTALL SPEED SENSOR
Install the speed sensor to the axle end.
Torque: 18 Nm (185 kgf-cm, 13 ft-lbf)
2. CONNECT SPEED SENSOR CONNECTOR
(a) Connect the speed sensor connector.
BR-53