TRANSFER - COMPONENT PARTS (REAR EXTENSION HOUSING ASSEMBLY)
9.
REMOVE SPEED METER DRIVE GEAR
(a)
Using snap ring pliers, remove the snap ring.
(b)
Remove the speedometer drive gear.
10. REMOVE REAR OUTPUT SHAFT
(a)
Using snap ring pliers, remove the snap ring.
(b)
Using SST and a hammer, remove the rear output shaft.
SST 09325-12010
1 1 . REMOVE DUST DEFLECTORS
(a)
Using a screwdriver and hammer, remove the rear exten-
sion housing dust deflectors.
TR-35