BR-48
BRAKE SYSTEM (STATION WAGON) - ANTI-LOCK BRAKE SYSTEM (ABS)
FRONT SPEED SENSOR REMOVAL
HINT:
When replacing the sensor or sensor harness,
replace the sensor and sensor harness together as a set.
Disconnect the speed sensor connector.
1.
DISCONNECT SPEED SENSOR CONNECTOR
2.
REMOVE SPEED SENSOR
(a)
Remove the four clamp bolts holding the sensor harness
RH from the axle housing.
(b)
Remove the eight clamp bolts holding the sensor harness
LH from the axle housing and leading arm.
(c)
Remove the speed sensor LH and RH from the steering
knuckle.
FRONT SPEED SENSOR INSTALLATION
1.
INSTALL SPEED SENSOR WIRE HARNESS
(a)
Install the sensor harness LH with the clamps and bolts in
place.
Torque:
18 N-m (185 kgf-cm, 13 ft-lbf)