Toyota LAND CRUISER Service Manual Supplement page 184

TR-26
TRANSFER - COMPONENT PARTS (CENTER DIFFERENTIAL ASSEMBLY)
1 1 . INSTALL HIGH SPEED OUTPUT GEAR AND NEEDLE
ROLLER BEARING
(a) Apply gear oil to the needle roller bearing.
(b) Place the synchronizer ring on the gear and install the
high speed output gear and needle roller bearing.
NOTICE: Align the ring slots with the shifting keys.
12. INSTALL FRONT TAPER ROLLER BEARING
Using SST and a press, install the front taper roller bear-
ing.
SST 09316-60010 (09316-00010)
13. INSTALL FRONT DRIVE GEAR PIECE
Using SST and a press, install the front drive gear piece.
SST 09316-60010 (09316-00010)
14. INSTALL SNAP RING
Select a snap ring that will allow minimum axial play and
install it on the shaft.