BE-32
BODY ELECTRICAL SYSTEM - CRUISE CONTROL SYSTEM
DIAGNOSIS SYSTEM
Output of Diagnostic Code
READ DIAGNOSTIC CODE
(Type A)
(a)
Turn the ignition switch on.
(b)
Turn the control switch to SET or RESUME position and
keep it there.
(c)
After pushing the main switch ON, keep the SET or
RESUME switch ON for 3 seconds.
(d)
Check that the "CRUISE" indicator light lights up in the
combination meter.
(e)
Turn the SET/COAST switch off.
(f)
Meet the conditions listed in the table below.
(g)
Read the diagnosis code on the cruise control indicator
light.
HINT:
• Indication codes appear in order from No. 1.
• If there is no indication code, perform troubleshooting
and inspection. (See page BE-34)
• Indication is stopped when the MAIN switch is repush-
ed.