Table of Contents
Advertisement
Button Combination Functions
The following functions require you to simultaneously push a
combination of InfoKey Controller buttons.
Configuring and Locking the Beginner Setting
For your first ride, the Segway PT is set to operate exclusively with
the Beginner Setting enabled. If the Beginner icon (turtle) does not
display, do NOT ride the Segway PT until you enable the Beginner
Setting.
The Segway PT ships from the factory with the Beginner Setting
locked, to encourage new riders to learn using the Beginner Setting.
To unlock the Beginner Setting:
1.
Power on the Segway PT.
2.
Press and hold the Beginner Button and the Information Display
Button simultaneously for more than 10 seconds. The
Information Display button will flash.
3.
Confirm that the Beginner icon (turtle) toggles when the Beginner
button is tapped.
Once the Beginner Setting is unlocked, you can toggle the Beginner
Setting on or off by tapping the Beginner button.
To lock the Beginner Setting:
1.
Repeat Steps 1 and 2 above.
2.
Confirm that the Beginner icon (turtle) is showing on the InfoKey
Display.
3.
Test the lock by tapping the Beginner button and confirming that
the Beginner icon remains showing in the InfoKey Display.
31
Hide quick links:
Advertisement
Table of Contents
