Removing/Replacing The Console Trim - Segway PT x2 Reference Manual

Removing/Replacing the Console Trim

Tool Required: None
To remove or replace the Console Trim:
1. Make sure the Segway PT is unplugged and powered off.
2. Pull up on the rigid plastic Console Trim located on the Console
and between the Mats. See Figure 43.
3. Replace the Console Trim by pressing it back in place over the
Console, then snapping the rear part of the Trim in place.
Do not attempt to open the Console. There are no user-
serviceable parts inside. By opening the Console, you risk
electric shock injury. Also, you could void your limited
warranty, damage your Segway PT, and render it unsafe to
use.
Figure 43. Removing or Replacing the Console Trim
112
WARNING!