Rider Off - Segway PT x2 Reference Manual

Rider Off

You do not have to be riding the Segway PT for the Stick Shake
Warning to occur. The Stick Shake Warning occurs if the Segway PT
is moved too quickly while in Riderless Balance Mode. Riderless
Balance Mode is when the Segway PT is in Balance mode without a
rider standing on the Powerbase. The Stick Shake Warning also
occurs if the Wheels spin as you pull the Segway PT over a curb or
up stairs.
Table 7 lists possible causes of the Stick Shake Warning and
recommended actions to take when the Stick Shake Warning occurs
with no Rider on the Mats.
Table 7. Stick Shake Warning With No Rider on the Mats
Possible Causes
Moving a Segway PT too quickly
with no rider on the Powerbase
while in Riderless Balance Mode.
Stepping on the Segway PT
when it is powered on, but not
ready to for you to step on.
54
Recommended Action
When moving your Segway PT in
Riderless Balance Mode, you
must move slowly and carefully.
Always keep the Segway PT
below you (lead it up stairs or
slopes and keep it below you
when descending stairs or
slopes).
Step off, center the LeanSteer
Frame, and level the Powerbase.
Once the center Balance
Indicator light turns green, step
on again.