Leansteer Frame/Handlebar Assembly; Tire/Wheel Assembly And Fenders - Segway PT x2 Reference Manual

LeanSteer Frame/Handlebar Assembly

Ensure the following:
The Handlebar is attached to the LeanSteer Frame.
The LeanSteer Frame is attached to the Powerbase.
The Handlebar is adjusted to the appropriate height.
See "Setting Up Your Segway PT" in the Getting Started
Manual.
The LeanSteer Frame pivots at the base to control left/right direction
of the Segway PT.
If you lean to the left while holding the Handlebar, the LeanSteer
Frame pivots and the Segway PT turns left. If you lean to the right
while holding the handlebar, the LeanSteer Frame pivots and the
Segway PT turns right. Always lean left or right in coordination with
the LeanSteer Frame.

Tire/Wheel Assembly and Fenders

Ensure that Tires are inflated to the proper tire inflation pressure as
specified in "Segway PT Specifications" on page 5.
Tires and Wheels are shipped as an assembly. Do not remove the
Tire from the Wheel.
The Fenders on the Segway PT are designed to protect the rider from
debris and to safeguard the rider while leaning into turns.
34