Mats; Powerbase; Console - Segway PT x2 Reference Manual

Mats

Your Segway PT comes with two Mats installed to the right and left of
the Console. These Mats protect the Rider Detect Sensors located
beneath them, as well as provide a comfortable surface on which to
stand. Mats should be secured in place prior to riding.
For more information, see "Removing/Installing the Mats"
on page 109.

Powerbase

The Powerbase consists of the following parts:

Console

Rider Detect Sensors
Controller Boards
Motors
Balance Sensor Assembly
Console
The Console is located behind the LeanSteer Frame and between the
two Mats. The Console is assembled with a cover that should not be
removed. A replaceable trim piece snaps onto the cover.
There are two sets of Indicator lights on the Console (see Figure 9):
Balance Indicator lights provide visual feedback about whether or
not the Segway PT is ready for you to step on.
Charge Indicator lights provide Battery charge status information
for the Segway PT Batteries when the Segway PT is plugged into
AC power.
35