5.
The third person may then press and hold both the Information
Display button and the Power/Standby button simultaneously
until the Safety Shutdown initiates. Figure 8 shows the InfoKey
Controller display during a training Safety Shutdown.
Power/Standby
button
Figure 8. InfoKey Controller Display During a Training Safety
6.
The spotter must continue holding the Segway PT so it does not
move.
7.
The rider must step off the Segway PT before 10 seconds
elapse.The rider has approximately 10 seconds from the start of
a Safety Shutdown to come to a controlled stop and step off.
After 10 seconds, the Segway PT will immediately shut down
when the Wheels reach zero speed.
Shutdown
Information
Display
button
33