Table of Contents
Advertisement
4.
If you are replacing the battery, verify that the new battery is type
CR2430. CR2430 replacement batteries are available at
Electronics stores.
A spare InfoKey Controller battery ships with your new Segway PT,
stored beneath the Console Trim. If you use this spare, you should
replace it as soon as possible, as you cannot operate your
Segway PT without a functioning InfoKey Controller.
5.
Insert the InfoKey Controller battery with the positive (+) side
showing.
6.
Screw on the InfoKey Controller's back cover.
7.
Screw on the InfoKey Controller Dock Adapter.
NOTE:
For more information, see "Removing/Replacing
the Console Trim" on page 112.
111
Hide quick links:
Advertisement
Table of Contents
