Tire/Wheel Assembly Is Loose And Wobbles - Segway PT x2 Reference Manual

Tire/Wheel Assembly is Loose and
Wobbles
The Tire/Wheel assembly is not secure. It appears to be loose and
wobbles.
You should review the following service procedures prior to
troubleshooting this problem for important instructions and torque
values.
"Removing the Tire/Wheel Assembly" on page 106
"Installing the Tire/Wheel Assembly" on page 107
Recommended Action:
1. Remove the Wheel Cap by pressing down on the outside edge,
and lifting the opposite outside edge with your fingers or a plastic
wedge.
2. Tighten the Wheel Nuts.
3. If the Tire/Wheel Assembly is still loose or wobbles, remove,
clean, and reseat the Tire/Wheel Assembly and the flange on
which the Tire/Wheel Assembly mounts.
125