Unplugging The Segway Pt - Segway PT x2 Reference Manual

Unplugging the Segway PT

When you are ready to use your Segway PT, remove the Power
Cord, then close the Charge Port Cover as follows:
1. Disconnect the Power Cord from the Charge Port on the
Segway PT.
2. Disconnect the Power Cord from the grounded AC outlet.
3. Store the Power Cord.
4. Close the Charge Port Cover.
Always keep the Charge Port Cover closed, except when you are
charging the Segway PT.
Closing the Charge Port Cover prevents water, dirt, dust, and other
contaminates from entering the Charge Port and causing damage
to your Segway PT.
68
CAUTION