Power/Standby Button Functions - Segway PT x2 Reference Manual

Power/Standby Button Functions

The following functions can be performed using the Power/Standby
button.
Powering On and Off
To power on the Segway PT:
1. Stand no more than 15 ft. (5m) from your Segway PT.
2. To power on, tap the Power/Standby button.
3. To power off, press the Power/Standby button for 2 seconds.
The Segway PT will only power off when no Rider Detect Sensors are
depressed (when there is no weight on the Mats).
Switching to Standby Mode from Balance Mode
1. Ensure the Segway PT is powered on and in Balance Mode.
2. To switch to Standby Mode, tap the Power/Standby button.
3. Confirm that there is no face in the Display and that no Balance
Indicator Lights are flashing.
If all four Balance Indicator lights are green and flashing, the
Segway PT is still in Balance Mode.
"Understanding Balance Mode"
See
Started Manual.
The Segway PT will only accept this command when no Rider Detect
Sensors are depressed (when there is no weight on the Mats).
24
in the Getting