Accessing An I/O Module Through A Console - Cisco Nexus 7718 Hardware Installation Manual

Managing the Switch
I/O Module
F2-Series Enhanced 48-port 1- and
10-GE with XL (N77-F248XP-23E)
F3-Series Enhanced 48-port 1-/10-GE
with XL (N77-F348XP-23)
F3-Series Enhanced 24-port 40-GE
with XL (N77-F324FQ-25)
F3-Series Enhanced 12-port 100-GE
with XL (N77-F312CK-26)
M3-Series 48-port 1-/10-GE
(N77-M348XP-23L)
M3-Series 24-port 40-GE
(N77-M324FQ-25L)
M3-Series 12-port 100-GE
(N77-M312CQ-26L)
The following F3 Series modules are supported by the Cisco Nexus 7700 Series switches:
• F3-Series Enhanced 48-port 1-/10-G Ethernet with XL (N77-F348XP-23)
• F3-Series Enhanced 24-port 40-G Ethernet with XL (N77-F324FQ-25)
• F3-Series Enhanced 12-port 100-G Ethernet with XL (N77-F312CK-26)
The following M3 Series modules are supported by the Cisco Nexus 7700 Series switches:
• M3-Series 48-port 1-/10-G Ethernet (N77-M348XP-23L)
• M3-Series 24-port 40-G Ethernet (N77-M324FQ-25L)
• M3-Series 12-port 100-G Ethernet (N77-M312CQ-26L)

Accessing an I/O Module through a Console

You can troubleshoot bootup problems for an I/O module by accessing the module through its console port.
This action establishes a console mode that you must exit in order to use other Cisco NX-OS commands.
To attach to the console port for an I/O module, use the attach console module command to specify the
module you need to work with. Specify a slot from 1 to 8 or from 11 to 18.
OL-30453-01
Supported Cisco Nexus FEX Models
2224TP 2232PP 2232TM
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
— — —
— — —
— — —
Cisco Nexus 7718 Switch Site Preparation and Hardware Installation Guide
Accessing an I/O Module through a Console
2232TM-E 2248PQ 2248TP
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
— — —
— — —
— — —
2248TP-E
Yes
Yes
Yes
Yes
—
—
—
77