Cisco Nexus 7718 Hardware Installation Manual page 211

Accessory Kits
If you do not receive a part listed in this document, contact Cisco Technical Support at this URL:
Note
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
If you purchased this product through a Cisco reseller, you might receive additional contents in your kit,
such as documentation, hardware, and power cables.
The product shipment includes power cords for the following power supplies:
• 3-kW AC power supplies—one power cord per power supply
• 3-kW DC power supplies—no power cords supplied (you must supply a 6 AWG cable for up to 45 A)
If your switch includes 3-kW AC power supplies, the product shipment includes one country-specific power
cord for each of those power supplies. The shipped cables depend on your specification when placing your
order for the switch. The available power cords for the 3-kW AC power supplies are as follows:
• CAB-AC-16A-AUS—power cord, 250-VAC 16A, C19, Australia
• CAB-AC-16A-CH—power cord, 16-A, China
• CAB-AC-2500W-EU—power cord, 250-VAC 16A, Europe
• CAB-AC-2500W-INT—power cord, 250-VAC 16A, International
• CAB-AC-2500W-ISRL—power cord, 250-VAC 16-A, Israel
• CAB-9K16A-US1—power cord, 250-VAC 16A, Src Plug NEMA 6-20, US/Japan
• CAB-AC-C6K-TWLK—power cord, 250-VAC 16A, twist lock, NEMA L6-20
• CAB-7513AC—power cord, AC 110V North America
• CAB-C19-CBN—cabinet jumper power cord, 250-VAC, 16A, C20C
• CAB-ACS-16—power cord, 16-A, Switzerland
• CAB-L520P-C19-US—NEMA L5-20 to IEC-C19 6ft US
All power cords will not be orderable at first customer shipment (FCS).
Note
All power cords will not be orderable at first customer shipment (FCS).
Note
OL-30453-01
Cisco Nexus 7718 Switch Site Preparation and Hardware Installation Guide
Accessory Kit Contents
201