Table of Contents
Advertisement
Installing a Chassis in a Rack or Cabinet
To adjust the placement of the chassis on the bottom-support rails, use the chassis handles shown in
Tip
the following figure.
Figure 8: Attaching the Chassis to the Rack
1
Step 9
If you removed any fabric modules before moving the chassis, replace each one in the chassis as follows:
a) Holding the front of the fabric module (the side with the LEDs), turn the module so that the front side is
vertical.
Cisco Nexus 7718 Switch Site Preparation and Hardware Installation Guide
30
Handles used to adjust the chassis
placement
2
Nine M6 x 19 mm or 10-24 x 3/4 in. Phillips screws used
to attach each side bracket to a front mounting rail (use a
total of 18 screws)
Installing the Chassis
OL-30453-01
Advertisement
Table of Contents
