Table of Contents
Advertisement
Replacing a Fan Tray
c) Pull the fan tray 1/2 inch (1.2 cm) out, pull on the bottom handle to disconnect the connectors at the bottom
of the tray, and then pull both handles out and down to remove the whole fan tray from the slot.
Figure 32: Removing a Fan Tray
1
Cisco Nexus 7718 Switch Site Preparation and Hardware Installation Guide
114
Unscrew four captive screws.
Installing or Replacing Modules, Fan Trays, and Power Supplies
3
Pull out and down to move the spring clip past
the top edge of the slot.
OL-30453-01
Advertisement
Table of Contents
