Cisco Nexus 7718 Hardware Installation Manual page 114

Using an ESD Wrist Strap to Prevent ESD Damage
Step 2 Attach the other end of the strap to the grounded chassis in one of the following ways:
• If the wrist strap has a banana plug on the other end, insert the plug into the ESD port on the chassis
(see the following figure for the location of the port on the front of the chassis). The chassis has another
ESD port on the rear of the chassis.
Figure 27: Location of the ESD Port on the Front of the Chassis
1
• If the wrist strap has an alligator clip on the other end, clip that onto one of the two screws holding the
grounding lug to the chassis.
Cisco Nexus 7718 Switch Site Preparation and Hardware Installation Guide
104
ESD port on the front of the chassis
Installing or Replacing Modules, Fan Trays, and Power Supplies
OL-30453-01