Cisco Nexus 7718 Hardware Installation Manual page 125

Installing or Replacing Modules, Fan Trays, and Power Supplies
2
d) Set the fan tray on an antistatic surface or inside an antistatic bag.
Caution
Step 2 Install the new fan tray in the open slot as follows:
a) Unpack the new fan tray and inspect it for damage.
If anything is damaged or missing, contact your customer representative immediately.
OL-30453-01
Pull the bottom handle to pull the bottom out
about 2 inches (5 cm) to disconnect the
connectors in back.
Do not touch the electrical connectors on the back side and do not set the back side connectors
on anything—always set a fan tray down on a covered side to protect its connectors.
Cisco Nexus 7718 Switch Site Preparation and Hardware Installation Guide
Replacing a Fan Tray
115