Table of Contents
Advertisement
Installing the Chassis
Grounding a Switch Chassis
The following figure shows the location of the grounding pad on the front of the chassis. There is another
grounding pad on the other side of the chassis.
Figure 10: Grounding Pad Location on the Front of the Cisco Nexus 7718 Chassis
1
Grounding pad
Step 5
Prepare the other end of the grounding wire and connect it to an appropriate grounding point in your site to
ensure an adequate earth ground for the switch. If the rack is fully bonded and grounded, connect the grounding
wire as explained in the documentation provided by the vendor for the rack.
Cisco Nexus 7718 Switch Site Preparation and Hardware Installation Guide
34
OL-30453-01
Advertisement
Table of Contents
