Cisco Nexus 7718 Hardware Installation Manual page 48

Grounding the Front ID Doors
Step 3 Tighten the screw to 7 in-lb (0.79 N-m) of torque to provide proper bonding.
Step 4
Connect the grounding cable from the door for the power supplies to the switch chassis, as shown in
10.
Figure 14: Grounding Cable Location between the door for the Power Supplies and the Cisco Nexus 7718 switch chassis
1 M4 screw
3 Flat washer
Cisco Nexus 7718 Switch Site Preparation and Hardware Installation Guide
38
2 M4 screw
4 Grounding cable
Installing the Chassis
Figure
OL-30453-01