Cisco AMP8050 Hardware Installation page 41

Chapter 3 Installing a Firepower 8000 Series Device
a quad-port 1000BASE-SX fiber interface with configurable bypass capability. See
•
Figure 3-4Quad-Port 1000BASE-SX Fiber Configurable Bypass NetMod, page 3-6
information.
a dual-port 10GBASE (MMSR or SMLR) fiber interface with configurable bypass capability. See
•
Figure 3-5Dual-Port 10GBASE (MMSR or SMLR) Fiber Configurable Bypass NetMod, page 3-6
for more information.
a dual-port 40GBASE-SR4 fiber interface with configurable bypass capability. See
•
Figure 3-6Dual-Port 40GBASE-SR4 Fiber Configurable Bypass NetMod, page 3-7
information.
The Firepower 8000 Series can be delivered with the following modules without configurable bypass
capability:
a quad-port 1000BASE-T copper interface without bypass capability. See
•
1000BASE-T Copper Non-Bypass NetMod, page 3-8
• a quad-port 1000BASE-SX fiber interface without bypass capability. See
1000BASE-SX Fiber Non-Bypass NetMod, page 3-8
• a quad-port 10GBASE (MMSR or SMLR) fiber interface without bypass capability. See
Figure 3-10Quad-Port 10GBASE (MMSR or SMLR) Fiber Non-Bypass NetMod, page 3-8
information.
A stacking module is optional on the Firepower 8140, 8250, and 8350; and is provided in the Firepower
8260, 8270, 8290 and the Firepower 8360, 8370, 8390 stacked configurations. See
8000 Series Stacking Module, page 3-9
Figure 3-3
You can use these connections to passively monitor up to four separate network segments. You also can
use paired interfaces in inline or inline with bypass mode, which allows you to deploy the device as an
intrusion prevention system on up to two networks.
If you want to take advantage of the device's automatic bypass capability, you must connect either the
two interfaces on the left or the two interfaces on the right to a network segment. This allows traffic to
flow even if the device fails or loses power. You must also use the web interface to configure a pair of
interfaces as an inline set and enable bypass mode on the inline set.
for more information.
Quad-Port 1000BASE-T Copper Configurable Bypass NetMod
Identifying the Sensing Interfaces
for more information.
for more information.
Firepower 8000 Series Hardware Installation Guide
for more
for more
Figure 3-8Quad-Port
Figure 3-9Quad-Port
for more
Firepower
3-5