Malware Storage Pack Kit For 1U Devices - Cisco AMP8050 Hardware Installation

Appendix C Installing a Malware Storage Pack
Examine both your kit and your device to ensure that you have the appropriate malware storage pack kit
for your device. Contact Cisco Support if you have any questions or concerns about your kit. See the
following sections for more information:
•
•

Malware Storage Pack Kit for 1U Devices

The 81xx Family of devices requires a malware storage pack kit for the 1U chassis consisting of:
•
•
•
Malware Storage Pack Kit for 2U Devices
The 82xx Family and 83xx Family of devices require a malware storage pack kit for the 2U chassis
consisting of:
•
•
Malware Storage Pack Kit for 1U Devices, page C-3
Malware Storage Pack Kit for 2U Devices, page C-3
a malware storage pack installed in a chassis-compatible SSD tray
a T8 Torx driver
an instruction guide (this document)
a malware storage pack installed in a chassis-compatible SSD tray
a 3mm hex wrench
Firepower 8000 Series Hardware Installation Guide
Before You Begin
C-3